工業油
冷凍機油_森尼爾潤滑油
本品蠟含量低、嚴格的傾點及絮凝點指標可以確保油品不會在冷凍機的低溫部件如蒸發器等處凝結和產生絮凝物，滿足冷凍機從高溫工作區到低溫工作區的自由轉換需求。
本品不會與制冷劑及制冷壓縮機部件發生不良的化學反應而產生沉積物，使壓縮機保持清潔，保證油品的使用壽命。
本品匹配了適量的復合添加劑，具有抗氧化、抗磨損性能，保證制冷設備在各種工況下的正常運行。
本品油品透明純凈，對工作部件有清潔作用，可有效防止雜質顆粒磨擦軸承表面現象的發生。
本品.與R22制冷劑相溶性好：在加工的過程中采用科學的方法對基礎油的組分進行了調整，使油品與制冷劑有較好的相溶性，保證冷凍機油不會從制冷劑中析出而附著在蒸發器的壁上，影響傳熱。
本品良好的熱穩定性：在進油閥的熱點部位不會產生沉積物。
本品確保良好的絕緣性能。在密封型機組內，油/冷凍劑混合物是電器部分的絕緣體。
本品雖被冷凍劑稀釋，但仍能在高操作溫度下有高的油膜強度，同時在低溫度的條件下，仍可保持流動性。
The wax content is low, the strict pour point and floc point index can guarantee the oil in the low-temperaturecomponents such as not freezer evaporator condensed and produce flocculation, to meet the demand from the free conversion of freezer high-temperature work area to low temperature working area.
This product is not with the refrigerant and refrigeration compressor components react bad and sediment, so that the compressor is kept clean, ensure the service life of oil.
This product is matching the composite additives, has better anti oxygen, wear resistance, to ensure the normal operation of refrigeration equipment in different conditions.
This product transparent and pure, clean effect on the working parts, can effectively prevent impurity particles frictionbearing surface phenomena.
This product is better. Compatibility with R22 refrigerant: on base oil were adjusted in the process using a specialmethod, so that oil and refrigerant has good compatibility, ensure the refrigeration oil from the refrigerant does notprecipitate and attached to the evaporator wall, effect of heat transfer.
The thermal stability of the product quality: from deposits in not hot spot oil inlet valve.
This product to ensure good insulation performance. In a sealed unit, oil / refrigerant mixture is an insulator electric parts.
This product is refrigerant dilution, but can still have high film strength at high operating temperatures, but at very lowtemperature conditions, can still maintain liquidity.